NEC N8405-019, User Manual

Page: 45 / 384

- 25 -
Chapter 3
Using Command Line Console Feature
This section explains the command line console feature.
Connection
To use the command line console feature, a management console (e.g., personal computer) must be
connected to the management port.
Connecting with Management Port
The EM card has two interfaces; the serial port and the network port (100BASE-TX/10BASE-T) as
a management port.
IMPORTANT:

To connect with the management network, use "EM1 port" and
"EM2 port" at the rear of the Blade Enclosure.
 The network ports on the EM card do not support the jumbo frame
feature. Do not enable the jumbo frame feature on the network to be
connected with the EM card.
NOTE:
Connect with the management port when providing initial
setup or maintenance of EM card.