NEC N8405-019, User Manual

Page: 97 / 384

- 77 -
E-Mail Alert
Syntax
[RW_E_MAIL_SECTION]
CFG_EMAIL_ALERT_USE = TRUE | FALSE
CFG_EMAIL_ALERT_LEVEL = <Alert level>
CFG_EMAIL_ALERT_ADDR1 = "<Address1>"
CFG_EMAIL_ALERT_ADDR2 = "<Address2>"
CFG_EMAIL_ALERT_ADDR3 = "<Address3>"
CFG_EMAIL_ALERT_FROM = "<AddressF>"
CFG_EMAIL_ALERT_REPLY_TO = "<AddressR>"
CFG_EMAIL_ALERT_SUBJECT = "<Subject>"
CFG_EMAIL_ALERT_SMTP_SERVER = <IP address>
CFG_EMAIL_ALERT_SMTP_PORT = <Port>
CFG_EMAIL_ALERT_SMTP_AUTH_METHOD = TRUE|FALSE
CFG_EMAIL_ALERT_SMTP_USER = "<User Name>"
CFG_EMAIL_ALERT_SMTP_PASSWD = "<Password>"
Description

CFG_EMAIL_ALERT_USE
Specify whether to use the E-Mail Alert feature.
1: TRUE (enable)
0: FALSE (disable)
The default setting is "0" (disable).
The following items can be enabled only when the CFG_EMAIL_ALERT_USE is set to
"1" (enable).
 CFG_EMAIL_ALERT_LEVEL
Specify the alert level to be sent via E-Mail.
Event of higher than the specified level is reported.
1: Higher than information level.
2: Higher than warning level (default)
3: Error level

CFG_EMAIL_ALERT_ADDRn
Specify the mail address to send an alert mail.
Up to three addresses can be specified.
Up to 127 characters are allowed for address.
2-byte code (e.g., Japanese character) is not allowed.
Nothing is set by the default.