NEC N8405-019, User Manual

Page: 207 / 384

- 187 -
IMPORTANT: Before obtaining the target information from the NAS
blade, you need to set Administrator password on Password
Configuration for NAS Blade screen.
Telnet must be enabled on the EXPRESSSCOPE Engine of the NAS
blade to obtain the target information. (Telnet is enabled by shipping
default.)
You also need to setup Windows Storage Server 2008 to obtain the
target information.
On Windows Storage Server 2008 pre-installed in iStorageNS500Ba,
the confirmation dialog as shown below appears when you first login
the system. Select [Yes] to use this feature. If you select [No], however,
you can setup these items later. From the Start menu, select [All
Programs] - [iSCSI Easy Configuration] - [Setup of iSCSI Easy
Configuration].
This program configures the following items:

Adds the following items to Windows Firewall Exceptions.
– Microsoft iSCSI Software Target Service Port (TCP:3260)
– Remote Procedure Call Port (TCP:135)
– NetBIOS Datagram Service Port (UDP:138)
– Microsoft iSCSISoftware Target Service
(%SystemRoot%\System32\WinTarget.exe)
– Microsoft iSCSI Software Target Service status proxy
(%SystemRoot%\System32\WTStatusProxy.exe)

Enables EMSSAC.
Use these settings at your own responsibility.

Boot to iSCSI target (*1) (*2)
Select [Enabled] to boot from target device.
When [Disabled] is selected, the target device is not used for bootup, and the next boot
device is selected.
When [One time disabled] is selected, only the first boot is disabled, and the subsequent
boot is enabled.
Use this parameter when installing an OS to the target device.