NEC N8405-019, User Manual

Page: 57 / 384

- 37 -
SNMP
Community Name
Specifies community name used for communication with the EM card via SNMP and SNMP trap
transmitted by the EM card. Up to 32 ASCII characters can be used. The default name is "public".
Write the configuration file in the format as shown below.
-----------------------------------------------------------------
[RW_SNMP_SECTION]
CFG_GET_REQUEST_COMMUNITY = "<Get-request Community Name>"
CFG_SET_REQUEST_COMMUNITY = "<Set-request Community Name>"
CFG_TRAP_REQUEST_COMMUNITY = "<Trap-request Community Name>"
-----------------------------------------------------------------
<Get-request Community Name>: Community name of SNMP Get Request
<Set-request Community Name>: Community name of SNMP Set Request
<Trap-request Community Name>: Community name of SNMP Trap Request
<Example>
-----------------------------------------------------------------
[RW_SNMP_SECTION]
CFG_GET_REQUEST_COMMUNITY = "GetReqCmu"
CFG_SET_REQUEST_COMMUNITY = "SetReqCmu"
CFG_TRAP_REQUEST_COMMUNITY = "TrapReqCmu"
-----------------------------------------------------------------