NEC N8405-019, User Manual

Page: 332 / 384

- 312 -
Collecting Logs
EM Log
Saves the log information of active EM in the USB memory connected to the USB port of the Blade
Enclosure.
When you select [6: Collect LOG] on the main menu, the [Collect LOG Sub] menu as shown below
appears.
Collect LOG Sub
1: EM
Selecting [1: EM] starts collecting EM log.
If the old EM log file exists in USB memory, the confirmation message as shown below appears.
Overwrite?
Y/N
Press [

] or [

] button to move cursor horizontally to switch selection between "Y" and "N".
To cancel log collection, put the cursor on "N" and press the [Enter] button. The screen goes back to
[Collect LOG Sub] menu without changing the setting.
To collect EM log by overwriting the current log, put the cursor on "Y" and press the [Enter] button.
The following screen is displayed while EM log is being collected.
Collecting LOG
Upon completion of EM log collection, the LCD displays the results.

When log collection completed successfully:
OK
 When log collection failed:
Error
The following message is displayed if the USB memory is not installed.
Install the USB memory in the USB port of the Blade Enclosure.
USB Memory
Not installed
The following message is displayed when the USB memory is installed but not connected with the
EM card.
Media
Not selected
Select "E" in [DVD] field on KVM/DVD Select menu.