NEC N8405-019, User Manual

Page: 328 / 384

- 308 -
EM Switchover
The following confirmation screen is displayed when you select [4: Switchover] on the [EM
Firmware Sub] menu.
Switchover OK?
Y/N
Press [

] or [

] button to move cursor horizontally to switch selection between "Y" and "N".
To cancel switchover, put the cursor on "N" and press the [Enter] button. The screen goes back to
[EM Firmware Sub] menu without changing the setting.
To execute switchover, put the cursor on "Y" and press the [Enter] button.
Upon completion of switchover, the LCD displays the results.

When switchover completed successfully:
OK

When switchover failed:
Error

When standby EM does not work normally:
Standby EM is
not ready.
NOTE:
If you press any button while the results or the error message
is being displayed, the screen goes back to [EM Firmware Sub] menu.