NEC N8405-019, User Manual

Page: 220 / 384

- 200 -
To configure the Logical Group Mapping, select the destination groups according to the description
below.
IMPORTANT:
To cancel the Logical Group Mapping, apply "Spare
Port Group", and then apply [default] of Boot Config.
 GbE Intelligent Switch
If the Smart Panel mode is used in GbE Intelligent switch, a group can be assigned to "the
internal port of GbE Intelligent switch connected with the CPU blade".
Available groups are Group 1 to Group 5.
* This setting is equivalent to "Port Group Mapping" of Smart Panel feature.
For more information, refer to the "Smart Panel Reference Guide" of the switch.
IMPORTANT:
A group for the external port side of the GbE
Intelligent Switch must have been configured using the Web console of
the switch module.

FC Switch
If the Access Gateway mode is used in FC switch, a connection between "the internal port
(F_Port) of the FC switch connected with the CPU blade" and "the external port (N_Port)
of the FC switch" can be configured.
Available groups on FC switch (12Port) are Group 1 to Group 4. They correspond to
N_Port (ports 17 to 20) on the FC Switch.
* This setting is equivalent to "F-N Port Mapping" of Access Gateway feature.
For more information, refer to the "8G FC Switch Access Gateway Administrator's
Guide".
Group number N_Port number
1 17
2 18
3 19
4 20
NOTES:

The [HTTP] button is used to link with the Web console of the
switch module installed in the relevant switch module slot.

By clicking the [Reset] button, values in this page will be returned
to the value before any changes have been made.