NEC N8405-019, User Manual

Page: 205 / 384

- 185 -
iSCSI Boot Primary/Secondary Configuration
The following screen appears after ISCSI Boot Device is selected.
General Parameters

2nd Target (*1)
Select [Enabled] when setting 2nd Target.
 Initiator Parameters via DHCP
Select [Enabled] when obtaining the initiator parameters from DHCP server. In this case,
you need to specify only [iSCSI Name] in [Initiator Configuration].
NOTE:
The DHCP server explained here does not mean the DHCP
server that the EM card provides internally.
If you select [Disabled], you need to enter values in [Initiator Configuration].

Target Parameters via DHCP
Select [Enabled] when obtaining the target parameters from DHCP server.
NOTE:
The DHCP server explained here does not mean the DHCP
server that the EM card provides internally.