NEC N8405-019, User Manual

Page: 341 / 384

- 321 -
Indication of Diagnosis End
When all the tests are completed normally, the result is indicated in the lower line of LCD for about
one second.
USB .........OK
ITF Normal End
When an error was detected, the result is indicated in the lower line of LCD for about one second.
USB .........OK
ITF Abnormal End
When diagnosis completes, the KVM/DVD selection status as shown below is displayed until the
system status indication appears. During this period, the Status LED of the SIGMABLADE monitor
stays red.
KVM/DVD Select
KVM: 1 DVD: 1
If a fatal error was detected, [HALT] appears in the lower line of the LCD, and the SIGMABLADE
monitor stops operating. The following three errors are fatal.

ROM diagnosis error

RAM diagnosis error
 I2C diagnosis error
ROM .........Err
HALT
RAM .........Err
HALT
I2C .........Err
HALT
IMPORTANT:
Some features of the SIGMABLADE monitor are
disabled during ITF Abnormal End. All the features of the
SIGMABLADE monitor are disabled during HALT. Contact your
service representative.