-
235
-
CPU Blade
Specify the delay time for issuing power-on permission to each CPU blade after the system is
powered on.
NOTES:
This feature is mainly used for SAN booting via FC switch module.
In usual case, the default setting ("0": no delay) may be used.
If you want to fix the boot order at start-up of the CPU blade (AC
power is turned on) using this feature, check the time duration until
the CPU blade is powered on when this feature is disabled. Then,
specify the similar time in seconds.
IMPORTANT:
The POWER switch does not power on the CPU blade
during delay time. Wait until the delay time is over.
Summary of Contents for N8405-019
