NEC N8405-019, User Manual

Page: 241 / 384

- 221 -

EM Card NTP Server IP Address
Specify the IP address of NTP server when you want to distribute it to the SNMP card of
CPU blade, switch module, and UPS through the DHCP feature of the EM card.

Easy Setup with DHCP Base IP Address
Specify whether to use the easy assignment of IP address to the SNMP card of CPU blade,
switch module, and UPS. If "Enable" is specified, the addresses are sequentially assigned
based on the base address.

EM Card DHCP Base IP Address
When "Enable" is selected for easy setup, specify the base address of the SNMP card of
the CPU blade, switch module, and UPS. (The subnet mask will be the value specified in
[EM Card Netmask].)
IP addresses assigned by Easy Setup with DHCP Base IP Address are as shown below.
–
CPU blade installed in slot #1: Base a0
–
CPU blade installed in slot #2: Base a1
–
CPU blade installed in slot #3: Base a2
:
–
CPU blade installed in slot #8: Base a7
–
Switch module installed in slot #1: Base a8
–
Switch module installed in slot #2: Base a9
:
–
Switch module installed in slot #6: Base a13
–
UPS1 to UPS4: Base a14 to Base a17
IMPORTANT:
The IP addresses for SNMP card of CPU blade, switch
module, and UPS are assigned based on the "base address".
The consecutive addresses from the specified "base address" to the last
address to be distributed by DHCP server must not be duplicated with
IP addresses assigned to other devices. If the EM card does not manage
the UPS, the last address to be distributed by DHCP server shall be
"base a 17". If the EM card manages the UPS, the last address
to be distributed by DHCP server shall be "base a 17".
When the DHCP feature in the EM card is disabled, the IP addresses are
released.