NEC N8405-019, User Manual

Page: 208 / 384

- 188 -

DHCP Vendor ID (*1)
Specify the vendor class ID of DHCP.
You need not to specify any value if DHCP is disabled.
Leave this item blank if not specifying vendor ID.
Up to 32 characters are accepted.
 Link Up Delay Time (*1)
Specify the waiting time in seconds before starting communication after the port has
linked up.
Allowable range is between 0 and 255 (seconds).

Use TCP Time Stamp (*1)
Select [Enabled] to use the TCP time stamp.

LUN Busy Retry Count (*1)
Specify the number of times the initiator retries connection when LUN is busy.
Allowable range is between 0 and 60.
 HBA Boot Mode (*1)
If the host OS supports HBA Boot Mode, the hardware offload feature is enabled by
selecting [Enabled] for this item.

VLAN ID (*1):
Select [Enabled] for the port you want to use VLAN on network to be used at boot up.
Then, specify VLAN ID. Allowable range is between 1 and 4094.

CHAP Authentication
Select an authentication method. If you select [CHAP], you need to specify [CHAP ID]
and [CHAP Secret].
If you select [Mutual CHAP], you need to specify [Mutual CHAP ID] and [Mutual CHAP
Secret].
NOTES:

CHAP: Unilateral authentication. The target authenticates the
initiator.

Mutual CHAP: Interactive authentication. In addition to the above,
the initiator authenticates the target.