NEC N8405-019, User Manual

Page: 83 / 384

- 63 -
SNMP
Syntax
[RW_SNMP_SECTION]
CFG_GET_REQUEST_COMMUNITY = "<Get-request Community Name>"
CFG_SET_REQUEST_COMMUNITY = "<Set-request Community Name>"
CFG_TRAP_REQUEST_COMMUNITY = "<Trap-request Community Name>"
CFG_IPADRESS01 = <IP Address 1>
CFG_IPADRESS02 = <IP Address 2>
CFG_IPADRESS03 = <IP Address 3>
CFG_ACK_WAIT_TIME = <Ack Waiting Time>
CFG_MAX_RETRY = <Maximum retry-number>
CFG_RESULT_PORT = <Port Number>
CFG_ANTI_TRAP_LOST = <TRUE | FALSE>
CFG_LANGUAGE = <Language>
Description
 CFG_GET_REQUEST_COMMUNITY
Specify the community name for SNMP Get Request. The default is "public".

CFG_SET_REQUEST_COMMUNITY
Specify the community name for SNMP Set Request. The default is "public".
If no name is specified for <Set-request Community Name>, SNMP Set request is
disabled.

CFG_TRAP_REQUEST_COMMUNITY
Specify the community name for SNMP Trap. The default is "public".
 CFG_IPADRESS0n (n: numeric between 1 and 3)
Specify the SNMP Trap destination (up to three destinations can be specified). The default
is "0.0.0.0".

CFG_ACK_WAIT_TIME
Specify the reply waiting time for SNMP Trap (unit: [second]). The default is 10 seconds.
 CFG_MAX_RETRY
Specify the number of retries of SNMP Trap. The default is three times.

CFG_RESULT_PORT
Specify the port number to receive the acknowledge response of trap message if the
acknowledge response is enabled. The default value is 5002. You need not to change this
value in normal case.