NEC N8405-019, User Manual

Page: 125 / 384

- 105 -
Chapter 4
Using Web Console Feature
This section describes how to use the Web console feature.
NOTE:
Make sure that the following features are enabled on Web
browser.

Cookie

JavaScript
These features are required to be enabled to use the Web Console
feature.
Using the IP addresses of EM card or blades that are managed by the
EM may be disabled unless you did not add the site to the Trusted Sites
zone. You need to add the site to the Trusted Sites zone.
Connection
Before using the Web console feature, connect the management console (e.g., personal computer)
with the management network port.
NOTE:
The EM1 and EM2 ports on the rear of the Blade Enclosure
are used for management network ports. See Chapter 2 for details.
You can access the Web console of EM card in the following URL by using a floating IP address of
active EM card.
URL: https://<ActiveEM Floating IP Address>/index.html
NOTES:

Default IP address:
https://192.168.1.8/index.html
 It is recommended to use SSL for security. In the environment
where SSL is unavailable, "http:" may be used to access the Web
console.