NEC N8405-019, User Manual

Page: 362 / 384

- 342 -
Setting OSD Hot Key
When you select [1:Hot Key Select] on [OSD Setup Menu] using the cursor and press the <Enter>
key, or press the <1> key, the [Hot Key Select] menu as shown below appears.
Select the a menu number using the cursor and press the <Enter>, or press <1>, <2>, <3>, or <4>
key to change ON (enable) or OFF (disable) the hot key. Press the <Esc> key to go back to the
[OSD Setup Menu].
Item Description
1: Hot Key (Ctrl x 2) Sets a hot key to press the <Ctrl> key twice.
Pressing this hot key activates the OSD simple mode.
2: Hot Key (CapsLock x 2) Sets a hot key to press the <Caps Lock> key twice.
Pressing this hot key activates the OSD simple mode.
3: Hot Key (Ctrl+Alt+Shift) Sets a hot key to press the <Ctrl>, <Alt>, and <Shift> keys
simultaneously.
Pressing this hot key activates the OSD menu mode.
4: Hot Key (Scroll x 2) Sets a hot key to press the <Scroll Lock> key twice.
Pressing this hot key activates the OSD menu mode.
NOTE:
All the hot keys are enabled (ON) by the shipping default.
When the optional server switch unit is connected and you want to use
the hot key on it, set hot keys so that they do not duplicate with other
hot keys.
If any hot key is also used in an application program or others, select a
valid key to avoid collision.
IMPORTANT:
If you have changed settings in [Hot Key Select]
menu, the confirmation menu asking you whether to save changes or
not appears when you exit from the OSD Setup menu. If you select [No
(does not save)], the change you have made is discarded.
When using (Ctrl+Alt+Shift) hot key, (Ctrl x 2) hot key must also be
enabled.