- 296 -
System Setup
Setting for EM
Sets an IP address of EM card itself, or a password for SIGMABLADE monitor.
When you select [5: SYSTEM CONFIG] on Main Menu, the submenu as shown below appears.
Enter Password
0000
Press [
] or [
] button to increase or decrease the number at the cursor position in the range
between 0 and 9.
Press [
] or [
] button to move cursor horizontally.
Enter the four-digit character, then press the [Enter] button to determine it.
If the entered password agrees with the registered one, the [EM CONFIG] menu appears.
If the password does not agree, the Enter Password menu remains displayed.
Press the [Menu] button to return to the Main Menu.
IMPORTANT:
The default password is "0000". Change password
according to "[EM CONFIG] Menu" described later.
[EM CONFIG] Menu
EM CONFIG
1: IP Address
1: IP Address
2: Net Mask
2: Net Mask
3: DEF Gateway
3: DEF Gateway
4: Set PASSWD
4: Set PASSWD
5: Enable PASSWD
5: Enable PASSWD
6: Backup CONFIG
6: Backup CONFIG
7: RESTR CONFIG
7: RESTR CONFIG
8: FW Update
Summary of Contents for N8405-019
