NEC N8405-019, User Manual

Page: 322 / 384

- 302 -
To cancel, put the cursor on "N" and press the [Enter] button. The screen goes back to [EM
CONFIG] menu without changing the setting.
IMPORTANT:
Even if you cancel restoration before executing
"apply" command, the configuration file has been read from the USB
memory. Accordingly, the configuration file will be applied at next boot
of EM card or when executing the "apply" command from CLI.
When no USB memory is installed, the following message is displayed.
Install the USB memory in the USB port of the Blade Enclosure.
USB Memory
Not installed
The following message is displayed when the USB memory has been installed but not connected
with the EM card.
Media
Not selected
Select "E" in [DVD] field on KVM/DVD Select menu.
The following message is displayed when proper file to be restored is not found in USB memory.
File
Not found
NOTE:
The configuration file is named as "backupem.tgz" and stored
in the top directory (folder) of USB memory.
If reading the configuration file failed, the following message is displayed.
Error
If the configuration file is not the proper one, the following message is displayed.
CONF File Error
NOTE:
If you press any button while the error message is being
displayed, the screen goes back to [EM CONFIG] menu.