NEC N8405-019, User Manual

Page: 360 / 384

- 340 -
Change Blade Enclosure Name
When you select [1: Change Enclosure Name] in [Enclosure Control Menu] and press the <Enter>
key, or press the <1> key, "Enter Enclosure Name" window as shown below appears.
The current enclosure name is displayed in the window. Enter a new enclosure name using a
keyboard and press the <Enter> key to determine it. If the entered enclosure name contains any
character unavailable for the enclosure name or the field is null, an error is displayed. If you use the
current enclosure name as is, press the <Esc> key to go back to [Enclosure Control Menu].
NOTE:
Characters available for blade name are as shown below.
'A' to 'Z', 'a' to 'z', '0' to '9', and '- ' (hyphen)
Up to 32 characters are accepted.
See "Change CPU Blade Name" for details of key operation.
If the entered enclosure name contains any character unavailable for the enclosure name, an error as
shown below is displayed.
Press the <Esc> key to go back to [Enclosure Control Menu].