NEC N8405-019, User Manual

Page: 329 / 384

- 309 -
EM Card Firmware Revision Synchronization
In two EM cards are used, the firmware revision of the EM card should be the same as that in
another EM card. This feature copies the firmware of either card onto another card to coincide with
each other.
When you select [5: Sync EMFW REV] on [EM Firmware Sub] menu, the following menu appears.
1:R0501 2:R0600
Which REV? 1/2
Press [

] or [

] button to move cursor horizontally to switch selection between "1" and "2".
When the revision is out of available range for copy, the following menu appears.
1:R0106 2:R0600
Can't Sync EMFW
When update is in progress on either of EM card, the following menu appears.
In Update
When the firmware copy process is in progress, the following menu appears.
In EMFW Sync
Press any button to go back to [EM Firmware Sub] menu.
FW Update Sub
1: EM Firmware
Select revision menu
1:R0501 2:R0600
Which REV? 1/2
To copy the firmware of EM card #1 onto EM card #2, put the cursor on "1" and press the [Enter]
button.
To copy the firmware of EM card #2 onto EM card #1, put the cursor on "2" and press the [Enter]
button.
Press the [Menu] button to go back to Main Menu.
If you select "1" on Select revision menu, the following menu appears.
EM2 to R0501 OK?
Y/N