NEC N8405-019, User Manual, Page: 48 / 384

- 28 -
Login / Logout
This section describes how to login or logout the EM card.
Login
When the EM card is accessed from the local console connected with the serial port or from the
computer connected through the management port, login authentication is executed.
Enter the login user name and login password in the order.
The login user name "admin". The shipping default password is "admin".
-----------------------------------------------------------------
em login: admin
Password:
...............
-----------------------------------------------------------------
IMPORTANT:
For security, change the default password to new one.
Logout
Enter "exit" command for logout.
Shown below is an example to logout by entering the "exit" command from the local console
connected with the serial port.
<Example>
-----------------------------------------------------------------
$ exit
login:
-----------------------------------------------------------------
NOTE:
If you logout from the remote console connected by TELNET,
the TELNET connection is also aborted. Accordingly, the prompt
"login:" will not be displayed.
Change Password
To change the password, use the "changepasswd" command.
Shown below is an example of changing the default password "admin" to "p@sswD".
<Example>
-----------------------------------------------------------------
$ changepasswd admin "p@sswD"
-----------------------------------------------------------------
For details about "changepasswd"command, see page 84.