SignaMax 065-7434, Руководство по настройке

Страница: 69 / 669

69 SIGNAMAX LLC • www.signamax.eu
Set Enable Password
To set the local enable password for entering each user-level.
The commands are as follows:
Command Description Config mode
enable password [level {1-15}] [0] password
To specify the level and password, and the password
is cleartext. config
no enable password [level {1-15}]
To cancel the configuration of the enable password
of a level config
Note:
•
When show run, the displayed password is encryptotext.
•
Now there are two kinds of encryption methods, they are new/old encryption methods.
The command sercice new-encrypt or the command no can be used to shift between
the new and the old encryption methods.
Configure User & Attributes
Use the command user to configure the local user and the related right attributes. The
commands are as follows:
Command Description Config mode
user
user-name password 0 password
To set the user password config
user user-name nopassword To set that a user can log in without password
authentication config
user
user-name privilege {0-15}
To configure the authorized level of the user config
user user-name autocommand command-line To configure the authorized auto-execute
command of the user config
user user-name autocommand-option {nohangup |
delay} [
0_120]
To set the option of a user executing the auto-
command. Nohangup means the connection is
not disconnected after the command is
executed. Delay means after how many
seconds delayed the command is executed. config
user user-name callback-dialstring dial-string To set the callback number of a user config
user user-name type xauth
To set the user
user-name as the IKE extended
authentication user and enter the configuration
mode of IKE extended authentication user
config
disable To screen the IKE extended user config-user
password 0
password
To set the password of a IKE extended user config-user
remote-settings To enter the configuration mode of remote
authorization config-user
ip {address
ip_addr [mask] | pool pl_name}
To set the ip address or the address pool
information of a user;
pl_name is the name of
the address pool
config-user-rset