SignaMax 065-7434, Руководство по настройке

Страница: 452 / 669

84 SIGNAMAX LLC • www.signamax.eu
The lp in the command means the local priority. Once the packet labels
the local priority, the packet is put into the corresponding queue as per
the configuration of the mapping table “local priority-discarding
priority” in the system. Schedule the packet according to the queue
scheduling arithmetic configured on the output port. For the
configuration of mapping table “Local priority-discarding priority”,
please refer to the chapter of Qos configuration.
Note that for the action of labeling 802.1 priority, the packet is not put
into the corresponding output queue as per the configuration of
mapping table “802.1p-local priority”. For the configuration of mapping
table “802.1p-local priority”, refer to the chapter of QoS configuration.
meter action { red | yellow } { drop <CR> | trasmit
[[ remark-dot1p priority_number [ <CR> ] | remark-dp
priority_number [ <CR> ] | remark-1p priority_number [ <CR> ] ]
[ remark-dscp dscp_number <CR> ]] | <CR> }
Command Description
meter action { red | yellow } drop
The traffic meter discards the
colored packets.
meter action { red | yellow } trasmit
[[
remark-dot1p
priority_number
[<CR>]
|
remark-dp
priority_number
[<CR>]
|
remark-
1p
priority_number
[<CR>] ] [
remark-dscp
dscp_number
<CR>
]] |
<CR>
The traffic meter remarks the
colored packets.
remark-dot1p
priority_number
To remark the priority field in the
L2 TAG of the packet as
priority_number
remark-dp
priority_number
To remark the discarding priority
of packet as
priority_number
remark-1p
priority_number
To remark the internal priority of
packet as
priority_number
remark-dscp
dscp_number
To remark DSCP field of TOS in IP
packet as dscp_number
[Configuration mode] Configuration mode of traffic meter
[Default status] By default, no actions for the colored packets are
configured.
The no format of the command is used to delete the actions for the
colored packets.
no meter action { red | yellow }
meter mode
This command is to configure the traffic meter mode as srtcm or trtcm.
The configuration is consistent with the definitions of srtcm and trtcm
in RFC2697 and RFC2698 standards. For the definitions of CIR, CBS,