SignaMax 065-7434, Руководство по настройке

Страница: 311 / 669

311 SIGNAMAX LLC • www.signamax.eu
speed via using previous cache searching results. But under certain circumstances, users can
choose to enable/disable the following two places to process route cache.
Fast Forwarding Route Cache
ip route-cache
Before sent to IP layer to deal, some packets received by interface can be transferred directly
if they match the route that stored in the cache.
Execute the following commands in the interface configuration mode:
ip route-cache
no ip route-cache
【
Default status
】
By default, the fast forwarding is enabled on the interface.
The command ip route-cache is used to enable the fast forwarding cache on the interface; the
no format of the command is to disable the fast forwarding cache.
Socket Route Cache
ip upper-cache
When there are packets sent down from the user layer and if the destination is the same each
time and the route is UP, the route in the cache can be used without searching the routing
table. Only one route, which is the result of recently searching the routing table, is stored in
cache.
Execute the following commands in the global configuration mode:
ip upper-cache
no ip upper-cache
【
Default status
】
By default, the route cache is enabled.
The no format of the command is to disable the route cache.
Configure IP Protocol Attributes
Signamax switches can be configured with the following IP attributes.
Configure IP Protocol Input Queue
Configure the following command in global mode:
ip option queue-length
ip option queue-length { queue-length }
no ip option queue-length { queue-length }
default ip option queue-length
Syntax Description
queue-length IP input queue length, and the value range is 30-600.
【 【 【 【
Default status
】 】 】 】
The default value is 200.