SignaMax 065-7434, Руководство по настройке

Страница: 641 / 669

273 SIGNAMAX LLC • www.signamax.eu
num
bundle
rtp header
{
enable
|
disable
}
Whether bundle payload contains
the RTP head; when
clock source
recovery
and
rtp mode
differential
are configured, the
RTP head must be contained.
config-bundle
pdvt
num
Select the tolerance value of the
PSN network delay jitter. The unit is
0.5ms. The default value is 10
(5ms). The larger the value, the
larger the delay of receiving and
sending data. Select the best value
as
per the actual network
environment.
config-bundle
ip dfbit set
To set the DF bits in the IP head as
1; prohibit the IP packet segment config-bundle
no ip dfbit set
To set the DF bits in the IP head as
1; permit the IP packet segment.
This is the default value. config-bundle
ip ttl
num
To set the TTL field size in the IP
head; the default value is 128. config-bundle
ip tos
num
To set the TOS field size in the IP
head; the default value is 128. config-bundle
clock master
To set the bundle is used by the
network clock of the TDM port to
recover the source. It is only used
for
clock source recovery
configuration. Only RAW bundle
can be set as
clock master
.
config-bundle
xconnect
ip-addr bundle-id To enable bundle connection and
specify the destination IP address
and bundle ID. The bundle ID is
used to identify one bundle
connection. config-bundle
no xconnect
To disable the bundle connection config-bundle
loopback
{
local
|
remote
} To enable the bundle loopback; this
is valid only when the bundle is
connected.
Local
is to loop back to
the TDM end and
remote
is to
loop back to the PSN network.
config-bundle
no loopback
To disable the bundle loopback config-bundle
show bundle
name
To display the status and statistics
information of the bundle enable
clear bundle
name To clear the statistics information of
the bundle enable
payload type
Syntax Description
payload type raw
The payload is the TDM bit flow and does not concern the
contents of the bit flow. It can transmit any contents
transparently. If bundle is unframed, the TDM device
connected to the bundle can be framed or unframed.
Only in this mode, the configuration of
clock source
recovery
is meaningful.
payload type hdlc
The payload is the HDLC frame from the TDM bit flow. In
this mode, the connected TDM device can be framed or