SignaMax 065-7434 страница 117 Скачать руководство пользователя

Страница: 117 / 669

117

SIGNAMAX LLC • www.signamax.eu

When the VLAN to which the Access port is added is deleted, the port exits from the deleted

VLAN and is added to the default VLAN 1.

port trunk allowed vlan

This command is used to configure the Trunk port to allow VLAN. The no format of the

command is used to delete the VLAN configuration allowed by the Trunk port.

port trunk allowed vlan {

vlanId

[to

vlanId

] | all }

no port trunk allowed vlan {

vlanId

[to

vlanId

] | all }

Syntax

Description

vlanId

To set one VLAN to pass; the value range of the VLAN ID is 1-
4094.

vlanId

To set a batch of VLANs to pass; the value range of the VLAN ID is
1-4094.

all

To set all VLANs (1-4094) to pass

Default status: By default, VLAN 1 is allowed to pass.

Note

The configuration command must be consistent with the port type. Otherwise, the system

prompts error information, such as port 0/1 current mode is not trunk.

The port type cannot switch from Hybrid to Trunk directly. It should first switch to Access and

then to Trunk.

Note

When Trunk port is configured to allow VLAN to pass:

If VLAN exists, the port is added to the VLAN;

If VLAN does not exist, the VLAN is not created automatically and the port is not added to

VLAN; after the allowed VLAN is created, the port is automatically added to the VLAN.

port hybrid vlan

This command is used to configure Hybrid port to be added to VLAN and select the mode of

being added to the LAN (Tag/Untag). The no format of the command is used to make the port

exit the VLAN and select to mode of exiting the corresponding VLAN.

port hybrid vlan

vlanId

{tagged | untagged}

no port hybrid vlan

vlanId

{tagged | untagged}

Syntax

Description

vlanId

The value range of VLAN ID is 1-4094.

Содержание 065-7434






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 065-7434

Отзывы:

Похожие инструкции для 065-7434

Бренды по названию

Популярные бренды

SignaMax 065-7434, Руководство по настройке

Результаты поиска

Содержание 065-7434

Отзывы:

Похожие инструкции для 065-7434

Бренды по названию

Популярные бренды