SignaMax 065-7434 Скачать руководство пользователя страница 352

Страница: 352 / 669

352

SIGNAMAX LLC • www.signamax.eu

authentication

mode

command.

When configuring the password and password chain, use the configured password to

authenticate.

When the length of the configured password in key-chain is over 16 characters, RIP only gets

the front 16 characters to authenticate no matter it is text authentication or MD5

authentication.

The no format of the command is used to delete the password chain of RIP v2 protocol packet

authentication on the interface.

ip rip authentication key-chain

key-chain-name

no ip rip authentication key-chain

Syntax

Description

key-chain-name

To configure the name of the password chain of RIP v2 protocol packet
authentication on the interface

【

Default status

】

There is no authentication password chain of the protocol packet.

ip rip metric

This command is used to configure the metric of RIP direct-connected subnet on the interface.

The command only affects the metric of the direct-connected subnet on the interface and does

not affect the metric of the route learning. The no format of the command is sued to recover

the default metric of RIP direct-connected subnet on the interface.

ip rip metric

metric-value

no ip rip metric [

metric-value

]

Syntax

Description

metric-value

To configure the metric value of the RIP direct-connected subnet on the
interface; the value range is 1-16.

【

Default status

】

metric-value: 0

ip rip receive version

This command is used to configure the version of the received RIP packets on the interface.

The no format if the command is used to recover the default value of the version of the

received RIP packets on the interface.

ip rip receive version {1 / 2}
no ip rip receive version

Содержание 065-7434






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 065-7434

Отзывы:

Бренды по названию

Популярные бренды

SignaMax 065-7434, Руководство по настройке

Результаты поиска

Содержание 065-7434

Отзывы:

Бренды по названию

Популярные бренды