SignaMax 065-7434 Скачать руководство пользователя

Страница: 347 / 669

347

SIGNAMAX LLC • www.signamax.eu

update.

output-delay

delay-interval

no output-delay

delay-interval

Syntax

Description

delay-interval

To configure the minimum interval of sending the packets in one RIP
update; the unit is ms and the value range is 8-50ms.

【

Default status

】

delay-interval: 0 ms

passive-interface

This command is used to configure the suppression interface of RIP sending packets. The

interface only receives the route update packets and do not send route update packets.

passive-interface

does not suppress sending unicast route update to the neighbor. The

command is used with the

neighbor

command and can control the switch to send the route

update in unicast form only to some neighbors, but not broadcast (RIPv2 is the multicast) the

route update to all neighboring switches on the interface.

The no format of the command is used to cancel the suppression interface of RIP sending

packets.

passive-interface

interface

no passive-interface

interface

Syntax

Description

interface

To configure the name of the suppression interface of RIP sending packets

【

Default status

】

The suppression interface of RIP sending packets is not specified.

recv-buffer-size

This command is used to configure the buffer size of the RIP received packets. The

command is to solve the packet loss problem when the high-speed interface sends the

RIP protocol packets to the low-speed interface. The no format of the command is used to

recover the default value of the buffer size of the RIP received packets.

recv-buffer-size

buffer-size

no recv-buffer-size

buffer-size

Syntax

Description

buffer-size

To configure the buffer size of the RIP received packets; the unit is byte and the
value range is 41600-5242880.

【

Default status

】

buffer-size: 41600 bytes (the default size of the buffer of the UDP socket

Содержание 065-7434






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 065-7434

Отзывы:

Похожие инструкции для 065-7434

Бренды по названию

Популярные бренды

SignaMax 065-7434, Руководство по настройке

Результаты поиска

Содержание 065-7434

Отзывы:

Похожие инструкции для 065-7434

Бренды по названию

Популярные бренды