background image

L2+ Managed switch

Thank you for picking us over the competition. For years we have been a leading provider of PoE over cat5

and Power Fiber System. Please take a few minutes to read through this guide before you get started. Not

only there are some helpful tips, but also we have some guides to help you plan and install your switch.

Installation Requirements

If this product is for indoor application, pick the cat5e (or higher category) UTP cable. We recommend you choose

pure copper UTP cable. Pure copper not only can guarantee a maximum transmission distance, but also the

bandwidth.

NOTE: Do not expose this switch to a rain or moisture environment which may cause electric shock or fire. The

switch should be installed at places with a good ventilation system

Hardware Overview

Front Panel

Port

Description

1-16

10/100/1000 SFP slot.

17-24

RJ45 port - 10/100/1000 Ethernet

25-26

10/100/1000 SFP slot

Console

CLI connection – Baud Rate : 9600

Reset

Reset button the switch.

PWR

OFF: No power Green: Power ON

Data

(Link/ACT)

OFF-No Link

Red-10/100/1000mbps link flashing indicates data exchanging.

PWR

OFF: No power Green: Power ON

Содержание L2+

Страница 1: ... you choose pure copper UTP cable Pure copper not only can guarantee a maximum transmission distance but also the bandwidth NOTE Do not expose this switch to a rain or moisture environment which may cause electric shock or fire The switch should be installed at places with a good ventilation system Hardware Overview Front Panel Port Description 1 16 10 100 1000 SFP slot 17 24 RJ45 port 10 100 1000...

Страница 2: ...ate ring network and block all the network accessing 1 First connect AC power cord to the power port at the rear of your switch 2 Next connect the other end to the power outlet In a short while power indicator will be turned on 3 Then connect the Ethernet cable to one of the uplink ports and connect the other end of this Ethernet cable to a core switch or router Now you have attached this switch t...

Страница 3: ...dress is still not write to the memory yet Please don t power off the switch Now change the IP address of your computer to match your new subnet you just assigned to the switch You should be able to access the switch with a new IP address Once you log into the web browser with a new IP address go to the first option Switch basic configuration choose the switch basic configuration again then click ...

Страница 4: ...re as a part of the safety certification modification or misuse can trigger a shock hazard that can result in serious injury or death 6 Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment 7 Protective bonding must be installed in accordance with local national wiring rules and regulations Need More Help If you require ...

Отзывы: