Dell Networking S6000 System, Справочное руководство

Страница: 804 / 1510

distribute-list redistributed-override
Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the
network.
S6000
Syntax
distribute-list redistributed-override in
To return to the default, use the
no distribute-list redistributed-
override in
command.
Defaults none
Command
Modes
• ROUTER ISIS ( for IPv4 )
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Added IPv6 ISIS support.
Version 6.3.1.0 Introduced.
Usage
Information When you execute this command, IS-IS does not download the route to the
routing table if the same route was redistributed into IS-IS routing protocol on the
same router.
domain-password
Set the authentication password for a routing domain.
S6000
Syntax
domain-password [hmac-md5 | encryption-type ] password
To disable the password, use the
no domain-password
command.
804
Intermediate System to Intermediate System (IS-IS)