Dell Networking S6000 System, Справочное руководство

Страница: 179 / 1510

Related
Commands
ip access-list standard — configures a standard ACL.
permit — configures a permit filter.
ip access-list standard
Create a standard IP access list (IP ACL) to filter based on IP address.
S6000
Syntax
ip access-list standard access-list-name
To delete an access list, use the
no ip access-list standard access-
list-name
command.
Parameters
access-list-
name Enter a string up to 140 characters long as the ACL name.
Defaults All IP access lists contain an implicit “deny any,” that is, if no match occurs, the
packet is dropped.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version
8.3.10.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added support for the non-contiguous mask and added the
monitor
option.
Version 6.5.1.0 Expanded to include the optional QoS
order
priority for the
ACL entry.
Access Control Lists (ACL)
179