Dell Networking S6000 System, Справочное руководство

Страница: 89 / 1510

exec-banner
Enable the display of a text string when the user enters EXEC mode.
S6000
Syntax
exec-banner
To disable the banner on terminal lines, use the
no exec-banner
command.
Defaults Enabled on all lines (if configured, the banner appears).
Command
Modes LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information Optionally, use the
banner exec
command to create a text string that is displayed
when you access EXEC mode. This command toggles that display.
Related
Commands
line — enables and configures console and virtual terminal lines to the system.
exec-timeout
Set a time interval that the system waits for input on a line before disconnecting the session.
S6000
Syntax
exec-timeout minutes [ seconds ]
To return to default settings, use the
no exec-timeout
command.
Control and Monitoring
89