Dell Networking S6000 System, Справочное руководство

Страница: 1090 / 1510

39
Per-VLAN Spanning Tree Plus (PVST+)
The Dell Networking operating software implementation of per-VLAN spanning tree plus (PVST+) is based
on the IEEE 802.1w standard spanning tree protocol.
Dell Networking OS supports PVST+ on the S6000 platform.
NOTE: For easier command line entry, the plus (+) sign is not used at the command line.
description
Enter a description of the PVST+.
S6000
Syntax
description { description }
To remove the description, use the
no description { description }
command.
Parameters
description Enter a description to identify the spanning tree (80
characters maximum).
Defaults none
Command
Modes SPANNING TREE PVST+ (The prompt is “config-pvst”.)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
pre-Version
7.7.1.1 Introduced.
1090
Per-VLAN Spanning Tree Plus (PVST+)