13.0.0.0 1 0.0.0.0 Gi 0/47 0 Intra-Area
150.150.150.0 2 13.0.0.3 Gi 0/47 - External
172.30.1.0 2 13.0.0.3 Gi 0/47 1 Intra-Area
Dell#
show ip ospf statistics
Display OSPF statistics.
S6000
Syntax
show ip ospf [
process-id
| vrf
vrf-name
] statistics global |
[interface
name
{neighbor
router-id
}]
Parameters
process-id
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
vrf
vrf-name
Enter the keyword
vrf
followed by the name of the VRF to
display statistics corresponding to the OSPF process that is
tied to a specific VRF.
global
Enter the keyword
global
to display the packet counts
received on all running OSPF interfaces and packet counts
OSPF neighbors receive and transmit.
interface
name
(OPTIONAL) Enter the keyword
interface
then one of the
following interface keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For Port Channel groups, enter the keywords
port-
channel
then a number. For the C-Series and S-Series,
the range is from 1 to 128.
• For a SONET interface, enter the keyword
sonet
then the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a VLAN, enter the keyword
vlan
then a number from
1 to 4094.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
neighbor
router-id
(OPTIONAL) Enter the keyword
neighbor
then the
neighbor’s router-id in dotted decimal format (A.B.C.D.).
Defaults
none
Command
Modes
• EXEC
• EXEC Privilege
1036
Open Shortest Path First (OSPFv2 and OSPFv3)
Содержание Networking S6000 System
