Dell Networking S6000 System, Справочное руководство

Страница: 505 / 1510

snake tests using VLAN configurations. To test 10G links,
physically remove the unit from the stack.
verbose Enter the keyword
verbose
to run the diagnostic in Verbose
mode. Verbose mode gives more information in the output
than Standard mode.
testname Enter the keyword
level2
to run a specific test case.
Enclose the test case name in double quotes (“ “). For
example:
diag stack-unit 1 level1 testname
“first”
.
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced the
verbose
option.
Version 7.7.1.0 Introduced on the S-Series.
offline stack-unit
Place a stack unit in the offline state.
S6000
Syntax
offline stack-unit number
Parameters
number
Enter the stack-unit id.
Range from 0 to 5.
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
Debugging and Diagnostics
505