Dell Networking S6000 System, Справочное руководство

Страница: 1412 / 1510

Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information
In the switch, the hardware clock is separate from the software and is called the
calendar. This hardware clock runs continuously. After the hardware clock (the
calendar) is set, the Dell Networking OS automatically updates the software clock
after system bootup.
You cannot delete this command (there is not a
no
version of this command).
clock summer-time date
Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis.
S6000
Syntax
clock summer-time time-zone date start-month start-day start-
year start-time end-month end-day end-year end-time [ offset ]
To delete a daylight saving time zone configuration, use the
no clock summer-
time
command.
Parameters
time-zone Enter the three-letter name for the time zone. This name is
displayed in the show clock output.
start-month Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
start-day Enter the number of the day. The range is from 1 to 31. You
can enter the name of a month to change the order of the
display to time day month year.
start-year Enter a four-digit number as the year. The range is from 1993
to 2035.
start-time Enter the time in hours:minutes. For the hour variable, use
the 24-hour format; example, 17:15 is 5:15 pm.
1412
System Time and Date