Dell Networking S6000 System, Справочное руководство

Страница: 172 / 1510

NOTE: Also refer to the Commands Common to all ACL Types section.
access-class
Apply a standard ACL to a terminal line.
S6000
Syntax
access-class access-list-name
To remove an ACL, use the
no access-class access-list-name
command.
Parameters
access-list-
name Enter the name of a configured Standard ACL, up to 140
characters.
Defaults Not configured.
Command
Modes LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increase the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
clear counters ip access-group
Erase all counters maintained for access lists.
S6000
Syntax
clear counters ip access-group [ access-list-name ]
172
Access Control Lists (ACL)