Dell Networking S6000 System, Справочное руководство

Страница: 635 / 1510

Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.4.1.0 Introduced
Usage
Information This command applies to any physical interface with speed set to 10/100.
NOTE: Starting with Dell Networking OS version 7.8.1.0, when you use a
copper SFP2 module with catalog number GP-SFP2-1T in the S25P model of
the S-Series, you can manually set its speed with the
speed
command. When
you set the speed to 10 Mbps or 100 Mbps, you can also execute the
duplex
command.
Related
Commands
negotiation auto — enables or disables auto-negotiation on an interface.
flowcontrol
Control how the system responds to and generates 802.3x pause frames on 10 Gig and 40 Gig ports.
S6000
Syntax
flowcontrol rx {off | on} tx {off | on}
flowcontrol rx {off | on} tx {off | on} [pause- threshold
{<1-12480>] [resume-offset <1-12480>}
The threshold commands are supported on S-Series only.
To return to the default, use the no flowcontrol rx {off | on}tx {off | on} threshold
command.
Parameters
rx on Enter the keywords
rx on
to process the received flow
control frames on this port. This is the default value for the
receive side.
rx off Enter the keywords
rx off
to ignore the received flow
control frames on this port.
tx on Enter the keywords
tx on
to send control frames from this
port to the connected device when a higher rate of traffic is
received.
Interfaces
635