Dell Networking S6000 System, Справочное руководство

Страница: 246 / 1510

Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information Use caution when you delete route maps because if you do not specify a sequence
number, all route maps with the same
map-name
are deleted when you use the
no
route-map map-name
command.
Example
Dell(conf)#route-map dempsey
Dell(config-route-map)#
Related
Commands show config — displays the current configuration.
set as-path
To modify the AS path for border gateway protocol (BGP) routes, configure a filter.
S6000
Syntax
set as-path prepend as-number [... as-number ]
To remove an AS-Path setting, use the
no set as-path {prepend as-number
| tag}
command.
Parameters
prepend as-
number
Enter the keyword
prepend
and then enter up to eight AS
numbers to be inserted into the BGP path information. The
range is from 1 to 65535.
Defaults Not configured.
Command
Modes ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
246
Access Control Lists (ACL)