Dell Networking S6000 System, Справочное руководство

Страница: 1235 / 1510

method listed, Dell Networking OS applies the next method configured. If users fail
the first method listed, no other methods are applied. The only exception is the
local method. If the user’s name is not listed in the local database, the next method
is applied. If the correct user name/password combination is not entered, the user
is not allowed access to the switch.
NOTE: If authentication fails using the primary method, Dell Networking OS
employs the second method (or third method, if necessary) automatically. For
example, if the server is reachable, but the server key is invalid, Dell
Networking OS proceeds to the next authentication method. The is
incorrect, but the user is still authenticated by the secondary method.
After configuring the
aaa authentication login
command, configure the
login authentication
command to enable the authentication scheme on
terminal lines.
Connections to the SSH server work with the following login mechanisms: local,
radius, and tacacs.
Related
Commands
login authentication — enables AAA login authentication on the terminal lines.
password — creates a password.
radius-server host — specifies a RADIUS server host.
tacacs-server host — specifies a server host.
access-class
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
S6000
Syntax
access-class access-list-name
To delete a setting, use the
no access-class
command.
Parameters
access-list-
name Enter the name of an established IP Standard ACL.
Defaults Not configured.
Command
Modes LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Security
1235