Dell Networking S6000 System, Справочное руководство

Страница: 209 / 1510

Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
mac access-group
Apply a MAC ACL to traffic entering or exiting an interface. The following interface types can be used for
VLAN , Physical interface, Port channel interface. Enter into the interface mode and apply the mac acl in
the following manner.
S6000
Syntax Applying MAC Access group on a physical / port channel interface
mac access-
group access-list-name {in [vlan vlan-range ] | out}
To delete a MAC access-group, use the
no mac access-group mac-list-
name
command.
Parameters
access-list-
name Enter the name of a configured MAC access list, up to 140
characters.
vlan vlan-range (OPTIONAL) Enter the keyword
vlan
and then enter a range
of VLANs. The range is from 1 to 4094 (you can use IDs 1 to
4094).
NOTE: This option is available only with the keyword
in
option.
in Enter the keyword
in
to configure the ACL to filter incoming
traffic.
out Enter the keyword
out
to configure the ACL to filter
outgoing traffic.
NOTE: The option is not available on the S-Series.
Access Control Lists (ACL)
209