Dell Networking S6000 System, Справочное руководство

Страница: 898 / 1510

vlan-name Enter the keywords
vlan-name
to advertise the vlan-name
TLV. This keyword is only supported on the C-Series and S-
Series.
Defaults Disabled.
Command
Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if- interface -lldp)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series. Added the
vlan-name
option.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Related
Commands
protocol lldp (Configuration) — enables LLDP globally.
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
advertise dot3-tlv
Advertise dot3 TLVs (Type, Length, Value).
S6000
Syntax
advertise dot3-tlv {max-frame-size}
To remove advertised dot3-tlv, use the
no advertise dot3-tlv {max-frame-
size}
command.
Parameters
max-frame-
size Enter the keywords
max-frame-size
to advertise the dot3
maximum frame size.
Defaults none
Command
Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if- interface -lldp)
898
Link Layer Discovery Protocol (LLDP)