Dell Networking S6000 System, Справочное руководство

Страница: 935 / 1510

Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.5.1.0 Introduced on the E-Series.
Usage
Information Dell Networking OS counts the SA messages originated by itself and those
messages received from the MSDP peers. When the total SA messages reach this
limit, the subsequent SA messages are dropped (even if they pass RPF checking and
policy checking).
If the total number of SA messages is already larger than the limit when this
command is applied, those SA messages that are already in Dell Networking OS
continue to be accepted. To enforce the limit in such situation, use the
clear ip
msdp sa-cache
command.
Related
Commands
ip msdp peer — configures the MSDP peer.
clear ip msdp peer — clears the MSDP peer.
show ip msdp — displays the MSDP information
ip msdp shutdown
Administratively shut down a configured MSDP peer.
S6000
Syntax
ip msdp shutdown { peer address }
Parameters
peer address Enter the peer address in a dotted decimal format (A.B.C.D.).
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Multicast Source Discovery Protocol (MSDP)
935