![Dell Networking S6000 System Скачать руководство пользователя страница 1445](http://html.mh-extra.com/html/dell/networking-s6000-system/networking-s6000-system_reference-manual_860401445.webp)
Version 7.6.1.0
Introduced on the C-Series and S-Series.
E-Series
original
Command
Usage
Information
Prior to using this command, to place the interface in Layer 2 mode, execute the
switchport
command.
To remove the trunk port designation, first remove the port (using the
no member
interface
command) from all stackable VLAN-enabled VLANs.
Starting with Dell Networking OS version 7.8.1.0, a VLAN-Stack trunk port is also
allowed to be configured as a tagged port and as an untagged port for single-
tagged VLANs. When the VLAN-Stack trunk port is also a member of an untagged
VLAN, the port must be in Hybrid mode. Refer to
.
In Example 1, a VLAN-Stack trunk port is configured and then also made part of a
single-tagged VLAN.
In Example 2, the tag protocol identifier (TPID) is set to 8848. The “Gi 3/10” port is
configured to act as a VLAN-Stack access port, while the “TenGi 8/0” port acts as a
VLAN-Stack trunk port, switching stackable VLAN traffic for VLAN 10, while also
switching untagged traffic for VLAN 30 and tagged traffic for VLAN 40. (To allow
VLAN 30 traffic, the native VLAN feature is required, by executing the
portmode
hybrid
Example 1
Dell(conf-if-gi-0/42)#switchport
Dell(conf-if-gi-0/42)#vlan-stack trunk
Dell(conf-if-gi-0/42)#show config
!
interface GigabitEthernet 0/42
no ip address
switchport
vlan-stack trunk
no shutdown
Dell(conf-if-gi-0/42)#interface vlan 100
Dell(conf-if-vl-100)#vlan-stack compatible
Dell(conf-if-vl-100-stack)#member gigabitethernet 0/42
Dell(conf-if-vl-100-stack)#show config
!
interface Vlan 100
no ip address
vlan-stack compatible
member GigabitEthernet 0/42
shutdown
Dell(conf-if-vl-100-stack)#interface vlan 20
Dell(conf-if-vl-20)#tagged gigabitethernet 0/42
Dell(conf-if-vl-20)#show config
!
interface Vlan 20
no ip address
tagged GigabitEthernet 0/42
shutdown
Dell(conf-if-vl-20)#do show vlan
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
VLAN Stacking
1445
Содержание Networking S6000 System
