Dell Networking S6000 System, Справочное руководство

Страница: 840 / 1510

metric-type
{external |
internal} (OPTIONAL) The external link type associated with the
default route advertised into a routing domain. The two
options are:
•
external
•
internal
level-1 (OPTIONAL) Routes are independently redistributed into IS-
IS as Level 1 routes.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-
IS as Level-1-2 routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-
IS as Level 2 routes. This setting is the default.
match {external
| internal} (OPTIONAL) The command used for OSPF to route and
redistribute into other routing domains. The values are
•
internal
•
external
route-map
map-name
map-name
is an identifier for a configured route map. The
route map should filter imported routes from the source
routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are
redistributed. If you specify a keyword, but fail to list route
map tags, no routes are imported.
Defaults Refer to Parameters.
Command
Modes
• ROUTER ISIS ( for IPv4 )
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 ( for IPv6 )
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version
8.3.12.0 Introduced on the S4810.
Version 7.5.1.0 Added support for IPv6 ISIS.
Version 6.3.1.0 Introduced.
840
Intermediate System to Intermediate System (IS-IS)