Dell Networking S6000 System, Справочное руководство

Страница: 250 / 1510

All routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
none Enter the keyword
none
to remove the community attribute
from routes meeting the route map criteria.
additive (OPTIONAL) Enter the keyword
additive
to add the
communities to already existing communities.
Defaults Not configured.
Command
Modes ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Related
Commands
match community — redistributes routes that match the COMMUNITY attribute.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
S6000
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-
area}
To remove a set level condition, use the
no set level {backbone | level-1
| level-1-2 | level-2 | stub-area}
command.
Parameters
backbone Enter the keyword
backbone
to redistribute matched routes
to the OSPF backbone area (area 0.0.0.0).
250
Access Control Lists (ACL)