Dell Networking S6000 System, Справочное руководство

Страница: 1239 / 1510

encryption-
type
(OPTIONAL) Enter the number
5
or
0
as the encryption type.
Enter a
5
then a text string as the hidden password. The text
string must be a password that was already encrypted by a
Dell Networking router.
Use this parameter only with a password that you copied
from the
show running-config
file of another Dell
Networking router.
password Enter a text string, up to 32 characters long, as the clear text
password.
Defaults No password is configured. level = 15 .
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information
To control access to command modes, use this command to define a password for
a level and use the
privilege level (CONFIGURATION mode)
command.
Passwords must meet the following criteria:
• Start with a letter, not a number.
• Passwords can have a regular expression as the password. To create a
password with a regular expression in it, use CNTL + v prior to entering regular
expression. For example, to create the password
abcd]e
, you type “
abcd CNTL
v ]e
”. When the password is created, you do not use the CNTL + v key
combination and enter “
abcd]e
”.
NOTE: The question mark (?) and the tilde (~) are not supported characters.
Security
1239