Dell Networking S6000 System, Справочное руководство

Страница: 486 / 1510

qos-policy-buffer
Create a QoS policy buffer and enter the configuration mode to configure the no-drop queues, ingress
buffer size, buffer limit for pausing, and buffer offset limit for resuming. This utility is supported on the
S6000
Syntax
qos-policy-buffer queue queue-num pause no-drop queue buffer-
size size pause-threshold threshold-value resume-offset
threshold-value shared-threshold-weight size
Parameters
policy-name Name of the QoS policy buffer that is applied to an interface
for this setting to be effective in conjunction with the DCB
input policy. You can specify the shared buffer threshold
limit, the ingress buffer size, buffer limit for pausing the
acceptance of packets, and the buffer offset limit for
resuming the acceptance of received packets. This method
of configuration enables different peer-provided and
administrative priorities to be set up because the intended
queue is directly configured instead of determining the
priority to queue mapping for local and remote parameters.
queue 0 to
queue 7 Specify the queue number to which the QoS policy buffer
parameters apply
pause Pause frames to be sent at the specified buffer limit levels
and pause packet settings
no-drop The packets for this queue must not be dropped
value Enter a number in the range of 0 to 7 to denote the priority
to be allocated to the dynamic buffer control mechanism
buffer-size Ingress buffer size
size Size of the ingress buffer in KB. Enter a number in the range
of 0 to 7787. The default is 45 KB.
pause-
threshold Buffer limit for pause frames to be sent
threshold-
value Buffer limit at which the port sends the pause to peer in KB.
Enter a number in the range of 0 to 7787. The default is 10
KB.
resume-offset Buffer offset limit for resuming in KB
threshold-
value Buffer offset limit at which the port resumes the peer in KB.
Enter a number in the range of 1 to 7787. The default is 10
KB.
shared-
threshold-
weight Buffer shared threshold weight
size Weightage of the priorities on the shared buffer size in the
system. Enter a number in the range of 0 to 9. The default
shared threshold weight is 10.
486
Data Center Bridging (DCB)