Dell Networking S6000 System, Справочное руководство

Страница: 1417 / 1510

debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
S6000
Syntax
debug ntp {adjust | all | authentication | events | loopfilter
| packets | select | sync}
To disable debugging of NTP transactions, use the
no debug ntp {adjust |
all | authentication | events | loopfilter | packets | select |
sync}
command.
Parameters
adjust Enter the keyword
adjust
to display information on NTP
clock adjustments.
all Enter the keyword
all
to display information on all NTP
transactions.
authentication Enter the keyword
authentication
to display information
on NTP authentication transactions.
events Enter the keyword
events
to display information on NTP
events.
loopfilter Enter the keyword
loopfilter
to display information on
NTP local clock frequency.
packets Enter the keyword
packets
to display information on NTP
packets.
select Enter the keyword
select
to display information on the NTP
clock selection.
sync Enter the keyword
sync
to display information on the NTP
clock synchronization.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
System Time and Date
1417