Dell Networking S6000 System, Справочное руководство

Страница: 348 / 1510

Related
Commands
bgp recursive-bgp-next-hop — disables next-hop resolution through other routes
learned by the BGP.
clear ip bgp dampening
Clear information on route dampening and return the suppressed route to the Active state.
S6000
Syntax
clear ip bgp [vrf vrf-name ] dampening [ ip-address mask ]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
and then the name of
the VRF to clear information on route dampening
corresponding to that VRF
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
ip-address
mask (OPTIONAL) Enter an IP address in dotted decimal format
and the prefix mask in slash format (/x) to clear dampening
information only that BGP neighbor.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0) Added support for VRF.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information After you enter this command, the software deletes the history routes and returns
the suppressed routes to the Active state.
The
clear ip bgp dampening
command does not clear the history paths.
348
Border Gateway Protocol