show cpu-traffic-stats
View the CPU traffic statistics.
S6000
Syntax
show cpu-traffic-stats [
port number
| all | cp ]
Parameters
port number
(OPTIONAL) Enter the port number to display traffic statistics
on that port only. The range is from 1 to 1568.
all
(OPTIONAL) Enter the keyword
all
to display traffic
statistics on all the interfaces receiving traffic, sorted based
on the traffic.
cp
(OPTIONAL) Enter the keyword
cp
to display traffic statistics
on the specified CPU.
Defaults
all
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Introduced on the S6000.
Version 9.0.0.0
Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1
Introduced on the Z9000.
Version 7.6.1.0
Introduced on the S-Series.
Version 7.5.1.0
Introduced on the C-Series
Version 6.2.1.1
Introduced on the E-Series.
Usage
Information
Traffic statistics are sorted on a per-interface basis; the interface receiving the most
traffic is displayed first. All CPU and port information is displayed unless a specific
port or CPU is specified. Traffic information is displayed for router ports only; not
for management interfaces. The traffic statistics are collected only after the
debug
cpu-traffic-stats
command is executed; not from the system bootup.
NOTE: After debugging is complete, use the
no debug cpu-traffic-
stats
command to shut off traffic statistics collection.
Control and Monitoring
115
Содержание Networking S6000 System
